PSS

Professional Services Schedule

Contract Value: $6.0M
Period of Performance: 07/24/19 through 07/23/24
Controlling Customer: GSA
Types of Orders: Various

Attachments:
Contract Summary Document

Special Item Number (SIN) Definitions

871-2

Concept Development and Requirements Analysis Services required under this SIN involve abstract or concept studies and analysis, requirements definition, preliminary planning, the evaluation of alternative technical approaches and associated costs for the development or enhancement of high level general performance specifications of a system, project, mission or activity. Typical associated tasks include, but are not limited to requirements analysis, cost/cost performance trade-off analysis, feasibility analysis, developing and completing fire safety evaluation worksheets as they relate to professional engineering services, regulatory compliance support, technology/system conceptual designs, training, consulting, defining interfaces and environments, collision avoidance analysis, performing plume impingement analysis, coupled load analysis, conducting spacecraft / satellite manifesting, and creating interface control documents. Example: The development and analysis of the total mission profile and life cycle of the improved satellite, including examination of performance and cost tradeoffs. Professional engineering solutions do not include architect-engineer services as defined in the Brooks Act and FAR Part 2 or construction services as defined in the Federal Acquisition Regulation Part 36 and Part 2.

871-3

System Design, Engineering and Integration Services required under this SIN involve the translation of a system (or subsystem, program, project, activity) concept into a preliminary and detailed design (engineering plans and specifications), performing risk identification/analysis, mitigation, traceability, and then integrating the various components to produce a working prototype or model of the system. Typical associated tasks include, but are not limited to computer-aided design (CAD), design studies and analysis, design review services, shop drawing review services, submittal review services, conducting fire protection facility surveys, developing risk reduction strategies and recommendations to mitigate identified risk conditions, fire modeling, performance-based design reviews, high level detailed specification and scope preparation, configuration, management and document control, fabrication, assembly and simulation, modeling, training, consulting, analysis of single or multi spacecraft missions, and mission design analysis. Example: The navigation satellite concept produced in the preceding stage will be converted to a detailed engineering design package, performance will be computer simulated and a working model will be built for testing and design verification. Professional engineering solutions do not include architect-engineer services as defined in the Brooks Act and FAR Part 2 or construction services as defined in the Federal Acquisition Regulation Part 36 and Part 2.

871-4

Test and Evaluation Services required under this SIN involve the application of various techniques demonstrating that a system (subsystem, program, project or activity) performs in accordance with the objectives outlined in the original design. Typical associated tasks include, but are not limited to testing of a prototype, first article(s) testing, environmental testing, performing inspections and witnessing acceptance testing of fire protection and life safety systems as they relate to professional engineering services, independent verification and validation (IV&V), reverse engineering, modeling and simulation (MAS) (to test the feasibility of a concept), system, quality assurance, physical testing of the product system, training, consulting, receptions and inspection of Government Furnished Equipment / Satellite, conducting testing and safety audits. Example: The navigation satellite-working model will be subjected to a series of tests, which may simulate and ultimately duplicate its operational environment. Professional engineering solutions do not include architect-engineer services as defined in the Brooks Act and FAR Part 2 or construction services as defined in the Federal Acquisition Regulation Part 36 and Part 2.

871-5

Integrated Logistics Support Services required under this SIN involves the analysis, planning and detailed design of all engineering specific logistics support, including material goods, personnel, and operational maintenance and repair of systems throughout their life cycles, excluding those systems associated with real property. Typical associated tasks include, but are not limited to ergonomic/human performance analysis, feasibility analysis, logistics planning, requirements determination, policy standards/procedures development, conducting research studies, long-term reliability and maintainability (RAM), conducting research studies, training, consulting, conducting acceptance, functional and post acceptance testing, testing, integration of the payload for flight Customer Agency, support provided during launch, orbital maneuvering and satellite separation from the spacecraft. Example: The full range of life cycle logistics support for the navigation satellite will be identified and designed in this stage including training, operation and maintenance requirements, and replacement procedures. Professional engineering solutions do not include architect-engineer services as defined in the Brooks Act and FAR Part 2 or construction services as defined in the Federal Acquisition Regulation Part 36 and Part 2.

871-6

Acquisition and Life Cycle Management Services required under this SIN involve all of the planning, budget, contract and systems/program management functions required to procure and or/produce, render operational, and provide life cycle support (maintenance, repair, supplies, engineering specific logistics) to technology-based systems, activities, subsystems, projects, etc. Typical associated tasks include, but are not limited to operation and maintenance (O&M), evaluation of inspection, testing, and maintenance program for fire protection and life safety systems, program/project management, technology transfer/insertion, training and consulting. Example: During this stage the actual manufacturing, launch, and performance monitoring of the navigation satellite will be assisted through project management, configuration management, reliability analysis, engineering retrofit improvements and similar functions. Professional engineering solutions do not include architect-engineer services as defined in the Brooks Act and FAR Part 2 or construction services as defined in the Federal Acquisition Regulation Part 36/Part 2.

874-1

Integrated Consulting Services: Contractors shall provide expert advice and assistance in support of an agency's mission-oriented business functions. Services covered by this SIN include management or strategy consulting, including research, evaluations, studies, analyses, scenarios/simulations, reports, business policy and regulation development assistance and strategy formulation; facilitation and related decision support services; survey services, using a variety of methodologies, including survey planning, design, and development; survey administration; data validation and analysis; reporting, and stakeholder briefings; advisory and assistance services in accordance with FAR 37.203. NOTE: Consulting services where the preponderance of work is specifically covered under other PSS SINS or GSA Schedules are not permitted under this SIN. NOTE: Legal, consulting, and audit services pertaining to financial matters are not covered under this SIN.

874-4

Training Services: Instructor Led Training, Web Based Training and Education Courses, Course Development and Test Administration, Learning Management, Internships Proposed courses shall be commercially-available off-the-shelf training and/or educational courses that are delivered via an Instructor-led (i.e. traditional classroom setting or conference/seminar) and/or web-based (i.e. Internet/Intranet, software packages and computer applications) system. Courses shall have a defined course title, length of time (i.e. hours, days, semesters, etc.), description of material to be taught (i.e. syllabi, table of contents, etc.), and whether materials are included in the price. (i.e. books, pamphlets, software, etc.).

Proposed professional services shall be in support of planning, creating, and/or executing testing and test administration, learning management, internship, or development of new courses or subject matter delivered via an instructor-led (i.e. traditional classroom setting or conference/seminar) and/or web-based (i.e. Internet/Intranet, software packages and computer applications) system. Proposed customization services are the result of planning, creating, and/or executing a proprietary format and may be priced as a flat rate or as Labor/hours using professional labor categories (i.e. Subject Matter Experts (SMEs), Program Managers, Project Managers, Research Assistant, Technical Specialist, etc.). Subject matter(s), Systems requirements and methodology(ies) to be used should be stated. Acquisition training will be accomplished under SIN 874-8 Functional industry-specific training covered under other schedules will not be accomplished under this SIN.

874-7

Integrated Business Program Support Services Contractors shall provide services to assist agencies in managing their mission-oriented business projects or programs and achieving mission performance goals. Services covered by this SIN include: all phases of program or project management, from planning to closeout and operational/administrative business support services in order to carry out program objectives. NOTE 1: Program support services where the preponderance of work is specifically covered under other PSS SINS or GSA Schedules are not permitted under this SIN. NOTE 2: Administrative support services are authorized under this SIN; however, they must be provided in conjunction with other professional business services covered under this Schedule and must be performed under the supervision of the contractors Project or Program Manager. Personal services as defined in FAR are prohibited under MOBIS.

874-504

Deployment Logistics Deployment Logistics - Typical tasks include contingency planning, identifying/employing regional or global resources, integrating public/private sector resources, inventory/property planning, movement, storage, end-to-end industrial relocation/expansion services, including project/asset/construction management, space planning and project integration/implementation, pre-positioning assets, facilitating customs processing/accountability; and deploying communications and logistics systems to permit rapid deployment and management of supplies and equipment.


"We specialize in providing advanced solutions..."

Learn more about our Core Capabilities:


For more information, contact us at info@centurum.com or at our headquarters.

Corporate Headquarters
8180 Greensboro Dr.
Suite 625
McLean, VA 22102
800-226-9393
Financial Headquarters
651 Route 73 N
Suite 107
Marlton, NJ 08053
800-376-1225